Capping

Scroll down for more details.

  • Purecap 1000 Single Head Capper
  • Purecap 2100 In-Line Capper with Centrifugal Feeder
  • Purecap 2300 In-Line Capper with Waterfall Feed System
  • Purecap 2200 In-Line Capper with Vertical Pin Ring Feeder
  • Purecap 2000 Automatic In-Line Bottle Uncapper
  • Purecap 2000 Cap Tightener
  • Purecap Dose Cap Placer

 

 

Resources

DTM Packaging PureCap 1000 Single Head Capper

For Plastic pre-threaded caps, supplied with Pick and Place and Magnetic Closing Head.

 

Can Handle: Screw caps, Oriented Snap Caps, T Corks, Ropp Metal Caps, Plugs, and Straight Corks.

DTM Packaging Purecap 2100 Automatic Inline Capping Machine with Centrifugal Feeder

Tightener Features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • No change parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Capping head assembly manufactured in 316L stainless steel
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for caps sizes ranging from 8 mm to 110 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty ½ hp motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment

Centrifugal type cap feeder features:

  • Construction in stainless steel.
  • 32 inch diameter feeding disc – ramp assembly.
  • Cap by demand controlled by photoelectric sensor.
  • Easy changeover for caps from 10mm to 90mm in diameter.
  • Easy changeover for caps from 0.125 to 2.5 inches in height.
  • Sorter mounted on machine, no need for independent height adjustment.
  • Includes filter pressure regulator and flow controls on all air hoses.

Electric and pneumatic requirements:

  • 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 10 CFM @ 80 p.s.i.

DTM Packaging Purecap 2300 Automatic Inline Capping Machine with Waterfall Cap Feed Elevator

Tightener Features:

  • Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • No change parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gear box driven
  • Independent spring loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Optional second drive motor to rotate the first set of capping discs on the opposite direction
  • Capping head assembly manufactured in 316L stainless steel
  • Independent adjustment for front or back capping discs
  • Capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for caps sizes ranging from 8 mm to 110 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • Heavy duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty ½ hp motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment

Waterfall feeder features:

  • Construction in stainless steel
  • 18 inches wide belt
  • Cap feeder is adjustable for caps from 8mm to 110mm in diameter, via quick adjust knobs
  • Caps feed on demand, controlled by photoelectric sensor
  • Includes air regulator and filter
  • Feeder inclination adjustable from 0 to 5 degrees
  • 10 cubic foot cap hopper
  • Drive provided by DC gear motor.
  • Independent Speed Control (potentiometer)

Electric and pneumatic requirements:

  • 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 10 CFM @ 80 p.s.i.

DTM Packaging Purecap 2200 Automatic Inline Capper with Vertical Pin Ring Feeder

Tightener Features:

  • Heavy-duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • No change parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gearbox driven
  • Independent spring-loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Optional second drive motor to rotate the first set of capping discs in the opposite direction
  • Capping head assembly manufactured in 316L stainless steel
  • Independent adjustment for front or back capping discs
  • The capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for caps sizes ranging from 8 mm to 110 mm in diameter

Vertical Wheel Cap Sorter:

  • Mechanical cap sorting requires no fine-tuning
  • Once set up, caps will only be dispensed in the correct orientaƟon
  • 24-inch diameter feeding disc
  • Interchangeable sorting rings
  • Easy changeover for caps from 15mm to 53mm in diameter, with appropriate tooling
  • Sorter mounted on the machine, no need for independent height adjustment
  • Driven by 1/4 Hp DC gear motor
  • Speed controlled via potentiometer
  • 3 Cubic feet integrated cap hopper

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • The heavy-duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty ½ hp motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment

Electric and pneumatic requirements:

  • 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 10 CFM @ 80 p.s.i.

DTM Packaging PURECAP 2000 Automatic Inline Bottle Uncapper

Features:

  • Heavy-duty 304 stainless steel welded frame
  • No change parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)
  • Four sets of opposing quills with air clutch adjustments
  • Stainless steel collection hopper for loose caps
  • Bottle back up eye

DTM Packaging Purecap 2000 Automatic Inline Cap Tightener

Tightener Features:

  • Heavy-duty 304 stainless steel welded C frame for easy mounting over existing conveyors
  • No change parts needed for a wide range of containers
  • Front and back covers with safety interlock switches standard
  • Top driven to insure no product spillage into drive assembly
  • Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment)

Capping discs features:

  • 4, 6, or 8 spindle configurations available, single gearbox driven
  • Independent spring-loaded capping discs for better torque and misalignment forgiveness.
  • Torque is able to be adjusted while the machine is running
  • Mechanical clutch assemblies standard (Optional pneumatic clutch upgrade available)
  • Optional second drive motor to rotate the first set of capping discs in the opposite direction
  • Capping head assembly manufactured in 316L stainless steel
  • Independent adjustment for front or back capping discs
  • The capping disc position is adjustable while the machine is running, without opening the safety covers.
  • Fully adjustable for caps sizes ranging from 8 mm to 110 mm in diameter

Bottle belts features:

  • Bottle belt width adjusted via front knobs
  • Bottle belt height adjusted via front knobs
  • The heavy-duty gear drive mechanism, no belts used for power transmission.
  • Adjustable speed heavy duty ½ hp motor gearbox
  • Bottle belt assemblies can be adjusted independently for width, taper, and angle to accommodate various sizes and styles of containers.
  • Optional double belt assembly with independent height and angle adjustment

Electric and pneumatic requirements:

  • 208 – 240 Volts, Single phase, 50/60Hz, 15 Amps.
  • 10 CFM @ 80 p.s.i.

Contact Us for a Quote on this Machine